Product Description
Conveyor Pulley is manufactured as per customer requirement,with main design under national standard,quality inspection focusing on shaft core,welded joint,rubber material and hardness,dynamic balance and so on for longer product life time.
| Drive/Head Pulley – A conveyor pulley used for the purpose of driving a conveyor belt. Typically mounted in external bearings and driven by an external drive source. |
| Return/Tail Pulley – A conveyor pulley used for the purpose of redirecting a conveyor belt back to the drive pulley. Tail pulleys can utilize internal bearings or can be mounted in external bearings and are typically located at the end of the conveyor bed. Tail pulleys commonly serve the purpose of a Take-Up pulley on conveyors of shorter lengths. |
| Snub Pulley – A conveyor pulley used to increase belt wrap around a drive pulley, typically for the purpose of improving traction. |
| Take-Up Pulley – A conveyor pulley used to remove slack and provide tension to a conveyor belt. Take-Up pulleys are more common to conveyors of longer lengths. |
| Bend Pulley – A conveyor pulley used to redirect the belt and provide belt tension where bends occur in the conveyor system. |
The specification of pulley:
Drive Drum: is the main component of power transmission. The drum can be divided into single drum (the angle of the belt to the drum is 210 ° ~ 230 °) , Double Drum (the angle of the belt to the drum is up to 350 °) and
multi-drum (used for high power) .
Bend Drum: is used for changing the running direction of the conveyor belt or increasing the surrounding angle of the conveyor belt on the driving roller, and the roller adopts a smooth rubber surface . The drum shaft shall be forgings and shall be nondestructive tested and the inspection report shall be provided.
The Various Surface of Pulley:
Conveyor pulley lagging is essential to improve conveyor belt performance, the combination of our pulley lagging can reduces belt slippage, improve tracking and extends life of belt, bearing & other components.
| PLAIN LAGGING:This style of finish is suitable for any pulley in the conveyor system where watershed is not necessary. It provides additional protection against belt wear, therefore, increasing the life of the pulley. |
| DIAMOND GROOVE LAGGING:This is the standard pattern on all Specdrum lagged conveyor pulleys. It is primarily used for reversing conveyor drive pulleys. It is also often used to allow bi-directional pulley rotation, and the pattern allows water to be dispersed away from the belt. |
| HERRINGBONE LAGGING:The herringbone pattern’s grooves are in the direction of rotation, and offers superior tractive properties. Each groove allows water and other liquids to escape between the face of the drum pulley and the belt. Herringbone grooved pulleys are directional and should be applied to the conveyor in a manner in which the grooves point toward the direction of the belt travel. |
| CHEVRON LAGGING:Some customers specify that the points of the groove should meet – as done in Chevron styled lagging. As before with the herringbone style, this would be used on drive drum pulleys and should be fitted in the correct manner, so as to allow proper use of the pattern and water dispersion also. |
| CERAMIC LAGGING:The Ceramic tiles are moulded into the lagging which is then cold bonded to the drum pulley. This style of finish allows excellent traction and reduces slippage, meaning that the belt tension is lower and, therefore as a result, increases the life of the pulley. |
| WELD-ON STRIP LAGGING: Weld-On Strip Lagging can be applied to bi-directional pulleys, and also has a finish to allow the easy dispersion of water or any fluids between the drum pulley and the belt. |
The Components of Pulley:
| 1. Drum or Shell:The drum is the portion of the pulley in direct contact with the belt. The shell is fabricated from either a rolled sheet of steel or from hollow steel tubing. |
| 2.Diaphragm Plates: The diaphragm or end plates of a pulley are circular discs which are fabricated from thick steel plate and which are welded into the shell at each end, to strengthen the drum.The end plates are bored in their centre to accommodate the pulley Shaft and the hubs for the pulley locking elements. |
| 3.Shaft :The shaft is designed to accommodate all the applied forces from the belt and / or the drive unit, with minimum deflection. The shaft is located and locked to the hubs of the end discs by means of a locking elements. The shaft and hence pulley shafts are often stepped. |
| 4.Locking Elements:These are high-precision manufactured items which are fitted over the shaft and into the pulley hubs. The locking elements attach the pulley firmly to the shaft via the end plates. |
| 5.Hubs:The hubs are fabricated and machined housings which are welded into the end plates. |
| 6.Lagging: It is sometimes necessary or desirable to improve the friction between the conveyor belt and the pulley in order to improve the torque that can be transmitted through a drive pulley. Improved traction over a pulley also assists with the training of the belt. In such cases pulley drum surfaces are `lagged` or covered in a rubberized material. |
| 7.Bearing: Bearings used for conveyor pulleys are generally spherical roller bearings, chosen for their radial and axial load supporting characteristics. The bearings are self-aligning relative to their raceways, which means that the bearings can be ‘misaligned’ relative to the shaft and plummer blocks, to a certain degree. In practical terms this implies that the bending of the shaft under loaded conditions as well as minor misalignment of the pulley support structure, can be accommodated by the bearing. |
The Production Process of Pulley:
Our Products:
| 1.Different types of Laggings can meet all kinds of complex engineering requirements. |
| 2.Advanced welding technology ensures the connection strength between Shell and End-Disk. |
| 3.High-strength Locking Elements can satisfy torque and bending requirements. |
| 4.T-shape End-Discs provide highest performance and reliability. |
| 5.The standardized Bearing Assembly makes it more convenient for the end user to replace it. |
| 6.Excellent raw material and advanced processing technology enable the shaft can withstand enough torque. |
| 7.Low maintenance for continued operation and low total cost of ownership. |
| 8.Scientific design process incorporating Finite Element Analysis. |
Our Workshop:
| Material: | Carbon Steel |
|---|---|
| Surface Treatment: | Baking Paint |
| Motor Type: | Frequency Control Motor |
| Samples: |
US$ 40/Piece
1 Piece(Min.Order) | Order Sample Free sample
|
|---|
| Customization: |
Available
| Customized Request |
|---|
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
|
Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
How do V pulleys handle variations in load capacity and speed?
V pulleys, also known as V-belt pulleys or sheaves, are designed to handle variations in load capacity and speed effectively. Here’s an explanation of how V pulleys accommodate these variations:
Load Capacity:
V pulleys handle variations in load capacity through the selection of appropriate belt and pulley sizes. The load capacity of a V-belt drive system depends on factors such as the width and thickness of the belt, the material of the belt, and the angle of wrap around the pulley. For higher load requirements, wider and thicker belts with higher tensile strength are chosen. By selecting the right combination of belt and pulley sizes, V pulleys can handle a wide range of load capacities, from light-duty applications to heavy-duty industrial applications.
Speed:
V pulleys handle variations in speed by adjusting the pulley diameter ratio. The speed ratio between the driving pulley and the driven pulley determines the speed at which the driven component operates. By using pulleys of different sizes, the speed ratio can be adjusted to achieve the desired speed. Increasing the diameter of the driving pulley or decreasing the diameter of the driven pulley will result in higher speed, while decreasing the diameter of the driving pulley or increasing the diameter of the driven pulley will result in lower speed. This flexibility allows V pulleys to accommodate a wide range of speed requirements in different applications.
It’s important to note that while V pulleys can handle variations in load capacity and speed, there are limits to their capabilities. Exceeding the recommended load capacity or operating at extremely high speeds can lead to belt slippage, reduced efficiency, and potential belt failure. Therefore, it’s crucial to adhere to the manufacturer’s guidelines and specifications when selecting V pulleys for specific applications to ensure optimal performance and longevity.
In summary, V pulleys handle variations in load capacity by selecting the appropriate belt and pulley sizes, while variations in speed are accommodated by adjusting the pulley diameter ratio. This flexibility allows V pulleys to effectively transmit power in a wide range of applications, providing reliable and efficient operation.
Can V pulleys be used in both simple and complex mechanical systems?
Yes, V pulleys can be used in both simple and complex mechanical systems. Their versatility and effectiveness make them suitable for a wide range of applications. Here’s a detailed explanation:
1. Simple Mechanical Systems:
In simple mechanical systems, V pulleys are often used in basic power transmission setups. These systems typically involve a single driving pulley connected to a driven pulley by a V-belt. The simplicity of the setup allows for easy installation and maintenance.
Simple mechanical systems utilizing V pulleys are commonly found in applications such as:
- Small machinery and equipment
- Home appliances
- Power tools
- Fans and blowers
- Pumps
2. Complex Mechanical Systems:
V pulleys are also employed in complex mechanical systems where multiple pulleys, belts, and components are interconnected. These systems require precise power transmission, synchronization, or speed control.
Complex mechanical systems that utilize V pulleys can be found in various industries, including:
- Automotive: V pulleys are used in engines, transmission systems, and accessory drives.
- Manufacturing: V pulleys are found in conveyor systems, industrial machinery, and production equipment.
- Agriculture: V pulleys are used in tractors, harvesters, and irrigation systems.
- Mining: V pulleys are employed in conveyor belts for material handling.
- Construction: V pulleys are used in construction machinery and equipment.
- HVAC (Heating, Ventilation, and Air Conditioning): V pulleys are utilized in air handling units, fans, and compressors.
3. Advantages in Both Simple and Complex Systems:
V pulleys offer several advantages that make them suitable for both simple and complex mechanical systems:
- Cost-Effective: V pulleys are generally affordable and provide efficient power transmission at a lower cost compared to other drive systems.
- Wide Range of Speed Ratios: By using pulleys of different sizes, V-belt drive systems can achieve a wide range of speed ratios to meet specific application requirements.
- Shock Absorption: The elasticity of V-belts allows them to absorb shock and vibration, reducing stress on the pulleys and other components.
- Quiet Operation: V-belt drive systems produce less noise compared to direct drives, making them suitable for applications where noise reduction is desired.
- Easy Installation and Maintenance: V pulleys are relatively simple to install and maintain, making them accessible for various users and applications.
Overall, the versatility, reliability, and cost-effectiveness of V pulleys make them viable options for both simple and complex mechanical systems, providing efficient power transmission in a wide range of applications.
In which industries are V pulleys commonly used?
V pulleys, also known as V-belt pulleys or sheaves, are commonly used in various industries due to their versatility and effectiveness in power transmission. Here’s an explanation of the industries where V pulleys are commonly employed:
1. Manufacturing and Industrial Sector:
The manufacturing and industrial sector extensively utilizes V pulleys in a wide range of applications. They are employed in machinery and equipment used in manufacturing processes, such as conveyor systems, pumps, compressors, machine tools, and packaging machines. V pulleys ensure efficient power transmission, enabling smooth operation and productivity in manufacturing facilities.
2. Automotive Industry:
V pulleys play a vital role in the automotive industry. They are used in various automotive systems, including engines, air conditioning systems, power steering systems, water pumps, and alternators. V pulleys in automotive applications ensure the proper functioning of essential components, contributing to the performance and reliability of vehicles.
3. HVAC and Refrigeration:
The HVAC (Heating, Ventilation, and Air Conditioning) and refrigeration industry heavily relies on V pulleys. They are employed in fans, blowers, and pumps used in HVAC systems, as well as in compressors and condenser units in refrigeration equipment. V pulleys facilitate efficient power transmission, enabling effective heating, cooling, and ventilation in residential, commercial, and industrial buildings.
4. Agriculture and Farming:
V pulleys are commonly used in the agriculture and farming industry. They are employed in agricultural machinery and equipment, such as tractors, combines, harvesters, and irrigation systems. V pulleys transfer power to various components, including pumps, augers, conveyors, and cutting mechanisms, ensuring efficient and reliable operation in farming operations.
5. Mining and Construction:
In the mining and construction industries, V pulleys find extensive use in heavy machinery and equipment. They are employed in excavators, bulldozers, cranes, loaders, and other mining and construction equipment. V pulleys facilitate power transmission to components such as hydraulic pumps, winches, and conveyor systems, ensuring reliable operation in demanding environments.
6. Power Generation:
V pulleys are utilized in power generation systems, including generators, turbines, and engines. They transfer power from the prime movers to the generators or other driven components. V pulleys in power generation applications contribute to the efficient conversion of energy and reliable electricity production.
7. Material Handling and Warehousing:
V pulleys are commonly employed in material handling and warehousing applications. They are used in conveyor systems, lifting equipment, and automated storage and retrieval systems. V pulleys enable the movement of materials and products, ensuring smooth and efficient logistics operations.
These are just a few examples of the industries where V pulleys are commonly used. Due to their versatility, reliability, and wide range of applications, V pulleys are employed in numerous industries and sectors that rely on efficient power transmission in their machinery and equipment.
editor by CX
2023-10-23